一般特性: |
Detection type |
photoelectric sampling |
Device type |
Multiturn absolute encoder |
功能安全性參數: |
MTTFd |
120 a |
Mission Time (TM) |
20 a |
L10h |
7.7 E+9 at 3000 rpm |
Diagnostic Coverage (DC) |
0 % |
電氣特性: |
Operating voltage |
10 ... 30 V DC |
No-load supply current |
max. 270 mA at 10 V DC
max. 115 mA at 24 V DC |
Time delay before availability |
< 250 ms |
Linearity |
± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit |
Output code |
binary code |
Code course (counting direction) |
programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending) |
接口: |
Interface type |
PROFINET |
Resolution |
|
|
Single turn |
up to 16 Bit |
|
Multiturn |
up to 14 Bit |
|
Overall resolution |
up to 30 Bit |
Transfer rate |
100 MBit/s |
Cycle time |
≤ 1 ms (IRT) , ≤ 10 ms (RT) |
連接: |
Terminal compartment |
see ordering information |
符合標準 |
Degree of protection |
DIN EN 60529, IP66 |
Climatic testing |
DIN EN 60068-2-3, no moisture condensation |
Emitted interference |
EN 61000-6-4:2007 |
Noise immunity |
EN 61000-6-2:2005 |
Shock resistance |
DIN EN 60068-2-27, 100 g, 3 ms |
Vibration resistance |
DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
周圍環境: |
Operating temperature |
-40 ... 70 °C (-40 ... 158 °F) |
Storage temperature |
-40 ... 85 °C (-40 ... 185 °F) |
機械特性: |
Material |
|
|
Combination 1 |
housing: anodized aluminum
flange: aluminum, blank
shaft: Stainless steel 1.4401 / AISI 316 |
|
Combination 2 (Inox) |
housing: stainless steel 1.4404 / AISI 316L
flange: stainless steel 1.4404 / AISI 316L
shaft: Stainless steel 1.4401 / AISI 316 |
Mass |
approx. 2600 g (combination 1)
approx. 3900 g (combination 2) |
Rotational speed |
max. 3000 min -1 |
Moment of inertia |
180 gcm2 |
Starting torque |
≤ 4 Ncm |
Shaft load |
|
|
Axial |
60 N |
|
Radial |
80 N |
與危險區域有關的應用數據: |
EC-Type Examination Certificate |
ITS 15 ATEX 18372X
IECEx ITS 15.0061X |
|
Group, category, type of protection |
II 2G Ex d IIC T5 Gb
II 2D Ex tb IIIC T100°C Db |
Directive conformity |
|
|
Directive 94/9/EC |
IEC 60079-0:2011 EN 60079-0:2012+A11:2013 IEC 60079-1:2014 EN 60079-1:2014 IEC 60079-31:2013 EN 60079-31:2014
|